Silicone Adhesive is a one component adhesive made specifically for bonding RTV silicone rubber to silicone rubber and other
substrates including some plastics (urethane), plaster, ceramic, fabrics, etc.
Renew Silicone Adhesive will work with most types of silicone rubber and provides a strong, flexible bond between silicone parts with high elongation.
- 4oz. Container
- Working Time: 5 Minutes
- Cure Time: 15 Minutes
- Silicone Adhesive is translucent clear, but can also be colored with silicone pigment if desired.
- Cured adhesive resists weathering, moisture, UV and high temperatures.
- Renew Silicone Adhesive can be used to repair torn silicone rubber.
- Other applications include bonding silicone for prosthetics.
Materials should be stored and used at room temperature (72° F / 23° C). Storing in a warm environment will reduce the shelf life of
unused material. This product has a limited shelf life and should be used as soon as possible.
Because no two applications are quite the
same, a small test application to determine suitability for your project is recommended if performance of this material is in question. A
clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.
Dispensing – Squeeze tube, taking care to not allow air to enter tube before replacing cap. Unused product in tube exposed to air will
Application – Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour.
Full cure is attained after 24 hours. Warmer temperatures (above room temperature) and higher humidity will result in faster cure time.
Lower temperatures will slow cure time.